Power Cord - Redroad G10 Guia De Inicio Rapido

1. Pick below items from the package
Vacuum-mop × 1
2. Connect the self-cleaning station to the power cord
Place the self-cleaning station against the wall and connect the power cord.
>0.5m
Notes:
• Do not expose the self-cleaning station to direct sunlight.
• Please ensure a space of at least 0.5m on both the left and right sides of the self-cleaning station, and a space
of at least 1.5m in front of it.
• Pay attention to the power cord, otherwise it may be dragged by the robot, causing the self-cleaning station to
move or power off.
• The clean water tank, dirty water tank, and dirty water filter must be installed in place.
Self-cleaning station × 1
>1.5m
1
Power cord × 1
>0.5m