Redroad G10 Guia De Inicio Rapido página 5

3. Power on and charging
When using for the first time, please move the vacuum-mop to the charging pole piece and
align it with the charging shrapnel of the self-cleaning station to charge.
Note: The vacuum-mop will start up automatically after connected to the self-cleaning station, and cannot be
shut down during charging.
Sweeping/mopping button:
In stand-by, press for a short period of time,
start cleaning.
In cleaning, press for a short period of time,
pause cleaning.
In recharging, press for a short period of time,
stop recharging.
Recharging cleaning button:
In in-station stand-by, press for a short period of time, start cleaning.
In in-station cleaning, press for a short period of time, stop cleaning.
Outside-station, press for a short period of time, recharge.
In in-station stand-by, press for a long period of time, start air drying.
In in-station air drying, press for a long period of time, stop air drying.
4. Download App and configure the network
① Scan the QR code below or search for
"Redroad" in the App store to download and
install the App.
Add the machine in the App interface and
③
enter the Wi-Fi password to connect.
WiFi-2.4G
Password
Note: Only Wi-Fi network in 2.4GHz band is supported.
② When the machine is powered on, press
and hold the "
at the same time, and then enter the network
configuration mode after hearing the prompt.
2
" and " " buttons for 7s