Fromm & Starck STAR ATFE 13 Manual De Instrucciones página 25

VII. Install the support beam (5) and side brackets (6).
VIII. Attach the support beam (5) to the cross beam (4), and you can choose the
specific position depending on your desk top.
Step 4
IX. Connect all cables to the sockets in the control box (8):
• connect the signal cable from the control panel to the socket (G1),
• connect the power cable to the socket (G2),
• connect signal cable from lifting column to socket (G3).
Step 5
X. Assemble the desk top, control panel (7) and control box (8).
XI. The control box must be attached to the desk top.
XII. If extension of the crossbar is required, perform the following steps:
loosen (L),
•