Publicidad
Idiomas disponibles
Idiomas disponibles
i)
Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) for
cleaning, as these may damage the surface of the material from which the unit
is made.
DISPOSAL OF USED UNITS.
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the product,
operating instructions or packaging. The materials used in this unit are recyclable
according to their marking. You will be making an important contribution to
protecting our environment by reusing, recycling or otherwise disposing of used
units.
Your local administration will provide you with information about the appropriate
disposal point for used units.
TROUBLESHOOTING
Problem
No response
when pressing
the ▲ or ▼
buttons after
connecting the
power supply.
Low lifting speed
or slippage when
lowering.
Motor does not
work as
instructed.
Work overload.
Insufficient
height for
raising/lowering.
Possible cause
No cable connection.
Desk overloaded -
maximum load 150 kg.
Problem with the motor.
Work cycle exceeded:
maximum on 2 min / off 18
min.
Change factory settings.
Action
Ensure that all cables are
well connected.
Ensure that the load on the
desk does not exceed 150
kg.
Contact your supplier or
dealer.
Restart after 18 min
disconnection from the
power supply.
Press and hold the M and 3
buttons simultaneously for
at least three seconds until
two continuous beeps
sound, indicating that the
factory settings have been
restored.
Publicidad
