Publicidad
Idiomas disponibles
Idiomas disponibles
a) Disconnect the machine from the
power supply (i.e. remove the
plug from the mains, remove the
disabling device or removable
battery) before carrying out
EN
maintenance or cleaning work.
b) Use only the manufacturer's
recommended replacement parts
and accessories.
c) Inspect and maintain the machine
regularly. Have the machine
repaired only by an authorized
repairer.
d) When not in use, store the machine
out of the reach of children.
Recommendation
The machine should be supplied via
a residual current device (RCD) with a
tripping current of not more than 30
mA.
Vibration and noise reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and low-
noise operating modes as well as wear
personal protective equipment.
Take the following points into account
to minimize the vibration and noise
exposure risks:
Only use the product as intended by
its design and these instructions.
Ensure that the product is in good
SAFETY INSTRUCTIONS
58
condition and well maintained.
Use correct attachments for the
product and ensure they are in good
condition.
Keep tight grip on the handles/grip
surface.
Maintain this product in accordance
with these instructions and keep it
well lubricated (where appropriate).
Plan your work schedule to spread any
high vibration tool use across a longer
period of time.
Emergency
Familiarize yourself with the use
of this product by means of this
instruction manual. Memories the
safety directions and follow them to
the letter. This will help to prevent
risks and hazards.
1. Always be alert when using this
product, so that you can recognize
and handle risks early. Fast
intervention can prevent serious
injury and damage to property.
2. Switch off and disconnect from
the power supply if there are
malfunctions. Have the product
checked by a qualified professional
and repaired, if necessary, before
you operate it again.
Residual risks
Even if you are operating this product
Publicidad
