Working With The Device - MSW Motor Technics MSW-DV-125Q Manual De Instrucciones

B. Jaw regulation lever
C. Assembly openings
3.2.
Preparation for work
LOCATION OF THE DEVICE
Keep the device away from any hot surfaces. Always operate the device on a level,
stable, clean, fireproof and dry surface and out of the reach of children and
persons with reduced mental, sensory and intellectual abilities.
ASSEMBLY OF THE DEVICE
The device should be attached to a flat surface, e.g. a work table, using special
holes (C) in the base of the product - mounting elements are not included in the
kit. When assembling the product, it should be borne in mind that the surface to
which the vice will be attached is able to withstand its weight together with the
weight of the objects processed on it.
3.3.

Working with the device

The vice is operated with the attached movable thrust lever - by turning it
clockwise, the jaws are brought closer to each other, while turning it in the
opposite direction causes the jaws to move away from each other. The
movement of the jaws is limited by the length of the screw on which they move
(see technical parameters for the given model). In addition, instead of turning the
lever to quickly bring the jaws closer or further away from each other in the
MSW-DV-125Q model, it is possible to slightly lift the thrust screw and move the
jaws in a given direction (see pictures below), then lower the screw and tighten
the jaws to the object.