Crimping The Ferrules; Connecting The Alarm System To The Home Station - Motorola Advisor TPG2200 Manual De Instrucciones

MN003556A01-AC
Chapter 3 : Operating Instructions
Figure 7: Bending the Antenna
NOTE: To obtain better performance, bend the antenna to a vertical position to adapt
with the surrounding.
3.4

Crimping the Ferrules

Procedure:
1 Sleeve off the wire harness of the alarm system.
2 Insert into the provided ferrules, and crimp it with crimper.
Figure 8: Crimping the ferrules.
3.5

Connecting the Alarm System to the Home Station

Procedure:
Insert the wires with crimped ferrules into each of the two top holes of the relay connector.
18