Personnel Qualification; Special Hazards - WIKA Obsolete A-AS-1 Manual De Instrucciones

2. Safety
Handle LED attachable indicators with the required care (protect from humidity, impacts,
strong magnetic fields, static electricity and extreme temperatures, do not insert any
objects into the instrument or its openings). Plugs and sockets must be protected from
contamination.
If the instrument is moved from a cold into a warm environment, the formation of conden-
GB
sation may result in the instrument malfunctioning. Before putting it back into operation,
wait for the instrument temperature and the room temperature to equalise.
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.

2.2 Personnel qualification

Skilled personnel
Skilled personnel are understood to be personnel who, based on their technical training,
knowledge of measurement and control technology and on their experience and knowl-
edge of country-specific regulations, current standards and directives, are capable of
carrying out the work described and independently recognising potential hazards.

2.3 Special hazards

6
WARNING!
Do not use this instrument in safety or emergency-stop devices. Incorrect
use of the instrument can result in injury.
WARNING!
Risk of injury if qualification is insufficient!
Improper handling can result in considerable injury and damage to equip-
ment.
The activities described in these operating instructions may only be carried
out by skilled personnel who have the qualifications described below.
WARNING!
For hazardous media such as oxygen, acetylene, flammable or toxic gases
or liquids, and refrigeration plants, compressors, etc., in addition to all
standard regulations, the appropriate existing codes or regulations must
also be followed.
Do not use this instrument in safety or emergency-stop devices. Incorrect
use of the instrument can result in injury.
WIKA operating instructions attachable indicator, models A-AS-1, WUR-1