Publicidad
Idiomas disponibles
Idiomas disponibles
Storage of power supply cord (Fig. 24 &
25)
Wind up the power supply cord around the multi-hook or
the base hook.
Storage of accessories
NOTE:
• Do not apply an excessive force to the accessories that
are held by the pipe holder. Applying an excessive
force to these accessories may cause damage to the
pipe holder.
Pipe rest can be used to store straight pipe, bent pipe and
others by just inserting these accessories. (Fig. 26)
The pipes can be placed into the pipe holder when also
stopping using the cleaner on the way for a while.
(Fig. 27)
You can place the cap in multi-hook while the hose is
connected to the tool. (Fig. 28)
Storage of hose (Fig. 29 & 7)
The hose can be placed on either base hook or multi-
hook.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Hose
• Front cuffs (22, 24, 38)
• Straight pipe
• Corner nozzle
• Round brush
• Powder filter
• Damper
• Prefilter
• Nozzle assembly
• Bent pipe
• Filter bag
• Hose band
• Belt hook complete
• Cap
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ from
country to country.
Noise
The typical A-weighted noise level determined according
to IEC60335-2-69:
Sound pressure level (L
Uncertainty (K) : 2.5 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
ENG905-1
) : 72.5 dB (A)
pA
Vibration
The vibration total value (tri-axial vector sum) determined
according to IEC60335-2-69:
The vibration emission value is below 2.5 m/s
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
ENG900-1
2
.
11
Publicidad
