Kenmore SPOTLITE KW2001 Manual De Uso Y Cuidado página 11

WARNING
Personal Injury and Product Damage
Hazard
· When any abnormality/failure occurs,
stop using the product immediately and
disconnect the power plug.
· DO NOT clean over floor electrical
outlets. Water will drip from the tool
after use and may puddle.
3. Detach the power cord plug from the
power cord. Plug the power cord plug
into an outlet located near the floor.
4. Press the power button to turn the
vacuum cleaner on.
5. Hold the tool about 1 inch over the stain
to be cleaned. Squeeze the spray trigger
to spray a generous amount of cleaning
solution over the soiled area. Use the
brush on the tool to agitate stains by
scrubbing in a back and forth motion.
USING THE CARPET SPOT CLEANER
Power
Button
6. To lift away the stain, apply downward
pressure on the front of the cleaning tool
and pull the tool backward slowly to
vacuum up excess dirty liquids. Repeat
as necessary.
7. Empty the dirty water tank when the
dirty liquid reaches the "Max Fill"
line and there is a loss in suction. See
instructions in the EMPTYING THE DIRTY
WATER TANK (page 12).
8. Once you have completed cleaning,
press the power button; unplug the
power cord plug from the outlet.
9. Turn the cord hooks to the proper
position and wrap the cord loosely
around the cord hooks.
- 11 -
Spray Trigger