Publicidad
Assembly
D
• Before starting to operate the equipment, its parts and
accessories must be properly assembled and in the
correct position.
• Connect the end of the hose (A) to the handle with
valve (B).
• Connect the spear (C) to the handle with valve.
• Connect the included nozzle (D) to the other end of
the lance (C).
• Check all connections for tightness and gaskets.
C
B
A
Star up
Charge the battery
• By using a rechargeable Lithium-Ion battery, the battery can
be charged at any time regardless of its charge level and
without loss of capacitance.
• The sprayer is low on battery power at the time of purchase.
It must be recharged before first use:
1. Insert the charger cable contact (B) into the battery
charging connection (C) of the sprayer.
N
V
2. Insert the charger plug into a properly installed outlet. The
Volt
B
C
LED will show a red light. When the battery is fully charged,
the LED will show green. During the charging process the
power supply contact, the charger and the rechargeable
battery become hot, which is normal and does not indicate
any malfunction.
3. Disconnect the charger from the power supply after 10
hours.
4. Remove the contact of the charger cable from the battery
charging connection of the unit.
5. Allow the equipment to cool down to room temperature in
case it gets warm during the charging process. Once it is at
room temperature, you can operate the device.
7
ENGLISH
Publicidad
