Publicidad
Idiomas disponibles
Idiomas disponibles
TABLE OF CONTENTS
Introduction
Safety Instructions
Operating Instructions
Specifications
Tool Components
Contact Information
INTRODUCTION
The Mac Tools
MPS1911 is a precision-built tool, designed for professionals for cutting metal,
™
plastic and other materials. This tool will deliver efficient, dependable service when used correctly
and with care. As with any fine power tool, for best performance the manufacturer's instructions
must be followed. Please study this manual before operating the tool and understand the safety
warnings and instructions. The instructions on installation, operation and maintenance should
be read carefully, and the manual kept for reference. NOTE: Additional safety measures may be
required because of your particular application of the tool. Contact your Mac Tools representative or
distributor with any questions concerning the tool and its use.
MACTOOLS.COM
Mac Tools-Europe, Stanley Black & Decker Inc. • Unit 3, Europa Court
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
Do not use damaged, frayed or deteriorated air hoses
and fittings.
Air powered tools can vibrate in use. Vibration, repetitive
motions or uncomfortable positions may be harmful to
your hands and arms. Stop using any tool if discomfort,
tingling feeling or pain occurs. Seek medical advice before
resuming use.
Do not carry the tool by the hose.
Keep body stance balanced and firm. Do not overreach
when operating this tool.
Do not use tool under the influence of drugs, alcohol,
medication, or if you are tired.
Always turn off the air supply and disconnect the air
supply hose before installing, removing or adjusting any
6.2 bars
accessory on this tool, or before performing any mainte-
(90 psig/
620 kPa)
nance on this tool.
2
2
2 - 6
7 - 8
9
10 - 11
12
Mac Tools • 505 North Cleveland Avenue • Westerville, Ohio 43082
Sheffield Business Park • Sheffield, Si 1XE
IMPORTANT SAFETY INFORMATION ENCLOSED.
READ THIS MANUAL BEFORE OPERATING THE TOOL.
SAVE FOR FUTURE REFERENCE
6.2 bars
(90 psig/
620 kPa)
6.2 bars
(90 psig/
620 kPa)
0114 2917266
WARNING
6.2 bars
(90 psig/
620 kPa)
6.2 bars
(90 psig/
6.2 bars
620 kPa)
(90 psig/
620 kPa)
6.2 bars
(90 psig/
620 kPa)
6.2 bars
(90 psig/
620 kPa)
6.2 bars
(90 psig/
620 kPa)
800.MACTOOLS
Use protective equipment such as glasses, gloves,
safety shoes, as well as acoustic protection.
Remain vigilant, use common sense and pay
attention when using the tool.
Always wear ANSI Z87.1 CAN CSA Z94.3 eye protec-
tion or for Europe, suitable CE marked eye protection
when operating or performing maintenance on
this tool.
Always wear suitable respiratory protection when
operating this tool.
Operate at 90 psig (6.2 bar / 620 kPa) Maximum
air pressure.
6.2 bars
(90 psig/
620 kPa)
Do not over-oil and do not use heavy grade oil
as stalling and low performance may result.
MACTOOLS.COM
Publicidad
