MANUAL DE INSTRUCCIONES
CAUTION!!! IMPORTANT FOR YOUR SAFETY
J
.P. SELECTA s.a.u.
CODIGO 80418 REV 0
5. Equipment Description
- Equipment with 3.5 inches color LCD screen. Running states real-time displaying
function, showing the flow rate and motor revolving speed at the same time,
touch screen controlling.
- With intelligent calibration function, could calibrate the flow rates and infusion
volume; suitable for high precision transferring fluids.
- Customer data saving function: can save 9 sets of data for customers.
- Accurate angle controlling function ensures to high precision distribution and
metering.
- Memory function available in case of power off, reliable and safety.
6. Installation
Place the pump on a flat, horizontal and level surface, trying to leave a space
of about 10 cm at the back and on each side.
Do NOT use the pump to dry or for thermic treatment of products
which could form explosive gases.
Be sure that the voltage supply is the same as the one indicated on
the characteristics plate of the equipment.
Do not use the equipment if it is NOT EARTHED.
If you have to change the plug bear in mind the following:
7. Operación
7.1 Function buttons
1.
2.
3.
4.
5.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.grupo-selecta.com
Blue cable: Neutral.
Brown cable: Phase.
Yellow/green cable: Earth.
Home key
Start/Pause key
Direction key
Full speed key
Display
11/2021
Tel 34 937 700 877 Fax 34 937 702 362
Pag.: 15