WERKU WK500600 Instrucciones Originales página 3

ENG
clothing, gloves, eyewear, and, in certain cases,
protective skin cream are necessary to protect
the skin Follow the coating material and
►
solvent manufacturer's warnings and instructions
Extraction equipment should be installed by the
►
user in accordance with local regulations
objects being sprayed must be earthed
each use, check all hoses for cuts, leaks, abrasion
or bulging of cover
►
movement of couplings
hose if any of these conditions exist
a hose Replace it with another grounded high-
►
pressure hose Pulling the trigger causes a recoil
►
force to the hand that is holding the airless gun
The recoil force of the airless gun is particularly
►
powerful when the tip has been removed and a
high pressure has been set on the airless high-
pressure pump Therefore, when cleaning without
►
tip set the pressure control valve to the lowest
pressure Use only manufacturer authorized parts
►
User assumes all risks and liabilities when using
►
parts that do not meet the minimum specifications
and safety devices of the airless gun manufacturer
Hazard: Any static-electricity discharge from the
►
airless gun is to be diverted to the grounded high-
pressure pump via the conductive high-pressure
hose as stipulated
►
temperature corresponds to the permissible
material temperature
ambient temperature can be found in the technical
data To avoid the generation of machine sparks,
►
prevent impact stresses and any work on the unit
with tools in the explosion-hazardous area.
RESIDUAL RISKS.
Residual risks are risks, which cannot be
►
excluded, even when equipment is used for the
intended purpose In such cases the applicable
►
areas of the actual residual risks will be pointed out
using warning and/or prohibition signs.
Risk Source / Cause Impact
Injection Atomized, high Severe
injury pressure stream injury or
of fluid amputation
Explosion Static electricity Severe
or fire or sparks injury
Hazaar- Hazaardous Severe
dous vapors from spray injury
vapors material
►
Before
►
Check for damage or
Immediately replace the
►
Never repair
►
The maximum surface
This and the permissible
►
Preventative Can occur
measures during:
NEVER aim the Setup,
gun at any part of operation
the body
Use well ventilated Operation
area. Ground de
airless gun
Use well ventilated Operation
area. Use mask
WORK AREA SAFETY.
Keep work area clean and well lit
►
and dark areas invite accidents
airless tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dusts
The Keep away from children and curious while
►
operating a airless tool
you to lose control.
PERSONAL SAFETY.
Stay alert, watch what you are doing and use
►
common sense when operating a airless tool
Do not use a airless tool while tired or under
►
the influence of drugs, alcohol or medicines
moment of inattention while operating airless tools
may cause damage serious personal.
USE PPE'S.
Use protection glasses according EN166
►
protection masks according EN149
the type of work, use other precise PPE.
DO NOT WORK ON TIPTOES.
Keep your feet on the ground and balance at all
►
times This enables better control of the airless
►
tool in unexpected situations.
DRESS PROPERLY.
Do not wear loose clothing or jewelry
►
your hair, clothing and gloves away from moving
parts Loose clothes, jewelry or long hair can be
►
caught in moving parts
connecting means for extracting and collecting
dust, make sure they are connected and properly
used The use of these devices can reduce dust
►
related hazards.
STORE AIRLESS TOOLS.
Store airless tools out of reach of children and
►
not allow the handling of airless tools to people
unfamiliar with the tools or these instructions
Airless tools are dangerous in the hands of
►
untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding,
►
there are no broken parts or other conditions
that may affect the operation of airless tools
Airless tools are repaired before use when they
►
3
English
Cluttered
►
Do not handle
►
Distractions can cause
►
►
►
If required by
►
Keep
►
If there are devices for
►
A
Use