Suntec Wellness KLIMATRONIC DryFix 20 select APP Manual De Instrucciones página 10

The ventilation speed and humidity level are set automatically and cannot
•
be set manually, the appliance dehumidifies automatically and with high
wind speed.
This function helps you to dry clothes, shoes or rugs faster.
•
Fan mode:
Please press the " mode" button (8) to switch on the ventilation mode. The
•
corresponding mode indication (9) lights up.
In this mode, only the fan is working, dehumidification function is not
•
available.
For low fan speed, press the fan speed button once, the low fan speed indication (1) and the fan mode
•
indication (9) light up.
For a high fan speed, press the fan speed key again. The high fan speed indicatoion (2) and the fan mode
•
indication (9) light up.
Timer:
Please press the timer button (13) to set the timer from 0 to 24 hours.
•
When the unit is switched on, press the timer button to set the shut-off time as described above.
•
• When the unit is switched off, press the timer key to set the switch-on time as described before.
Sleep mode:
• Please press the sleep mode button (14) to switch on the sleep mode. All indication lights (except WIFI and
sleep mode) and the display are switched off. The "Water tank full" light will light up in case the water tank
should be emptied.
Colour light indication:
• If the humidity of the ambient air is below 50%, the indicator light lights up in blue.
• If the humidity is between 50% and 70%, the indicator light is green.
• If the humidity is above 70%, the indicator light is red.
WIFI (Suntec Wellness APP download: pic. 3)
• When connecting the device, the WLAN indicator (16) will start blinking. Please follow the step-by-step
instructions in the app to connect your device to the Wi-Fi and set up the control.
• The Wi-Fi indicator will be continuously lighted when the app and device are connected.
Resetting the WIFI in case of connection errors and for new connections
• If you want to connect the device to a new WLAN or if there are problems when trying to connect the divice
to the app, it is necessary to reset the WLAN. Press and hold the Mode button (8) for 5-10 seconds. The
WLAN indicator will blink 2 times per second and is ready to be connected to the app again.
Please follow the step-by-step instructions in the app to connect your device to the Wi-Fi and set up the
•
control.
The Wi-Fi indicator will light up continuously when the app and device are connected.
•
Drainage
Water tank:
As soon as the water tank is full, the unit stops working, a warning signal sounds and the 'water tank full'
•
indication (6) lights up on the display.
Please switch off and unplug the unit.
•
Carefully pull out the water tank and tip out the water by using the handle.
•
Please clean and dry the empty tank, and carefully place it back into the machine.
•
Continuous drainage:
• Please pull the plug out of the outlet.
• Please remove the water tank from the appliance as described above and remove
the drainage hose.
• Carefully push the water tank back into the appliance without the drainage hose.
• You will find the drainage opening on the back of the machine.
Please insert the drainage hose into the opening and place the other end of the
•
hose into a container so that the water can drain off continuously.
Please make sure that the hose is connected tightly to prevent the water from leaking.
•
Cleaning and maintenance
To avoid injury, please switch off and unplug the appliance before starting service or cleaning.
Cleaning:
Please unplug the unit.
•
Please clean the unit with a dry and soft cloth. For heavy dirt, please use a slightly damp cloth.
•
Please do not use any chemical products (such as petrol, alcohol, etc.). The unit's housing and the unit's
•
surface may be damaged.
Cleaning the dust filter:
Please open the filter cover on the backside of the unit and carefully remove the filter.
•
• To remove dust from this filter, please use a vacuum cleaner or to tap it out carefully.
• If the filter is very dirty, wash it in water with neutral detergent, rinse well with water and let it dry.
• Carefully put the filter back into the unit and close the filter cover.