Suntec Wellness KLIMATRONIC DryFix 16 EQ Manual De Instrucciones página 9

clean. They should be cleaned regularly to ensure
best performance.
The appliance must always be stored and
transported in an upright position.
If in doubt, we recommend that you wait at
least 24 hours before switching the
hours before switching the unit on again.
Installation
To save energy and ensure optimal performance of the appliance, please close all doors and windows in the
•
room.
Please place the appliance on a flat level surface.
•
• To avoid loud noises and vibrations, you can place a small carpet or rubber mat under the unit.
Parts (pic. 1)
1 Control panel
2 Humidity control light/colour indicator
3 Air inlet with dust filter
Control Panel (pic. 2)
Buttons:
1 child lock
2 timer
3 ventilation speed
4 sleep mode
5 fan
6 humidity
7 mode selection
8 On/Off
Functions
On/off:
Please plug in the unit.
•
Please make sure that the water tank is empty before switching on.
•
• Please press the On/Off button (8) to switch the unit on or off.
• The unit starts automatically with the previous setting.
Mode:
After switching on the device, please press the mode button (7) to choose between manual dehumidification
•
(19), laundry drying (20), continuous dehumidification (18) or strong dehumidification (15).
Manual dehumidification:
Please press the mode button (7) to switch on the manual dehumidification function. The manual
•
dehumidification indicator (19) lights up. In this mode you can set the desired degree of dehumidification and
the ventilation speed.
• Please use the humidity button (6) to set the air dehumidification from 30% - 80%.
• Please press ventilation speed button (3) to choose between low and high ventilation speed
Important.
4 Water tank
5 Handles
6 Drainage hole
Light indicators:
9 low ventilation speed
10 high ventilation speed
11 child Lock
12 timers
13 frost protection
14 water tank full
15 strong dehumidification
16 sleep mode
17 ventilation mode
18 continuous dehumidification
19 manual dehumidification
20 laundry drying