Technical Data - RECA R120 Instrucciones De Servicio

GB Operating instructions
RECA Workshop lamp R120
SAFETY INSTRUCTIONS
• Read the operating instructions carefully before using and observe the
safety instructions!
• Do not use the device if there is damage to the housing, plug or cable.
Consult your local authorised specialist!
• The device must only be operated in closed, dry rooms!
• Carry out cleaning tasks only when the mains plug is removed from the
mains power!
• Do not open the device! Repair work and replacing the rechargeable
battery pack may only be carried out by electricians.
• Keep away from children! Children should be supervised in order to ensure
that they do not play with the device!
• This device is not to be used by persons (including children) who have
restricted physical, sensory or mental capabilities or who do not have
adequate experience and knowledge in handling this device. Such persons
must be instructed beforehand by a supervisory person who is responsible
for their safety or must be supervised during the use of the device!
• Failure to observe the safety instructions can result in dangerous injuries to
persons or damage to the device!
FUNCTIONAL OVERVIEW
• Professional workshop lamp with the latest SMD LED technology
• Small auxiliary light at the head of the lamp
• Robust, splash-proof plastic housing with rubber-coated grip
• Permanently installed Li-ion rechargeable battery pack (3.7V / 750mAh)
• Charging options via AC/DC mains adapter (110V-240V) or car cigarette
lighter adapter (12-24V)
• Charge monitoring via coloured LEDs

TECHNICAL DATA

Integrated illuminants
Main light: 7x 0.65W SMD LEDs
Auxiliary light: 1.5W LED
Lighting intensity: 200 Lux / 0,5m distance
Luminous flux: 120 Lumen
Battery life: ca. 3.5h (main light), ca. 5h (auxiliary light)
USE
Press 1x:
The auxiliary light will be switched on.
Press 2x:
The auxiliary light will be switched off and the main light will be
switched on at the 100% setting.
Press 3x:
Both lights are switched off.
CHARGING PROCEDURE
Charge the workshop lamp fully before using for the first time. If the workshop
lamp has been stored for an extended period of time it should likewise be fully
charged again before first use.
The following charging options are available:
• Via USB mains adapter plugged into the mains outlet
• Via USB car adapter connected to the cigarette lighter of the vehicle
• Via USB cable connected to a third party device with a USB output port
(e.g. PC, laptop)
Connect the USB mains adapter / USB vehicle adapter with the R120 workshop
lamp by plugging the micro-USB plug on one end of the USB / micro-USB
charge cable provided into the micro-USB socket on the light and plugging
the USB plug on the other end of the charge cable into the USB socket of the
USB mains adapter / USB vehicle adapter. Then plug the USB mains adapter
into a mains outlet or plug the USB vehicle adapter into the cigarette lighter
of the vehicle. To charge the workshop light with a third party device, plug
the USB plug on the charge cable into the USB socket of the third party device
after having first connected the micro-USB plug on the other end of the charge
cable with the workshop lamp as described above.
CHARGE STATUS INDICATION
Display of the charge status of the battery pack during the
charge procedure:
• LEDs illuminate green: Battery pack is fully charged
• LEDs illuminate red: Battery pack is charging
The R120 workshop lamp is protected against over-charging. This means that
you can leave the workshop lamp connected to the charging power after its
rechargeable battery pack has been fully charged.
ENVIRONMENTAL INFORMATION
The device should not be discarded in the normal household waste under any
circumstances. Dispose of the device via an authorised disposal centre or your
communal waste disposal facility. Observe the current applicable regulations.
Contact your waste disposal facility in the event of any doubt. Dispose of all
packaging materials via an environmentally friendly disposal facility. Rechar-
geable batteries must not be disposed of in the household waste. Return used
rechargeable batteries to your dealer or hand them in to a battery collection
facility.
MAINTENANCE / CARE
In order to ensure that the device continues to work without problems, please
keep the charge socket free of dirt and contaminants. Clean the device only
when the mains plug is removed from the mains power and with a dry cloth.
LIMITATION OF LIABILITY
The information contained within these operating instructions can be changed
without prior notification. RECA NORM accepts no liability for direct, indirect,
incidental or other damage or consequential damage arising though improper
handling or through disregard of the information contained within these
operating instructions.
Subject to technical changes. We assume no liability for printing errors. 10/2021