Reversing The Appliance Doors - Infiniton FGC-BB690 Manual De Usuario

Reversing the appliance doors

We recommend you seek the help of another individual to support the
doors whilst performing this operation.
1. Carefully prise off the white cover caps for the side that you wish
to switch the hinges to
2. With the door closed remove the hinge caps and the screws from
the top hinge attaching the hinge to the door, support the door
whilst doing this, then remove the screws from the lower hinge
3. Support the door at the bottom and open the hinges away from the
appliance door. Carefully lift the appliance door away, ensuring not
to damage the hinges or the door. Place the door somewhere
safe where it will not cause or receive damage
4. Repeat steps 1 to 3 for the lower door if necessary
5. With the top hinge open, remove
the screws that fix the hinge to the
appliance cabinet, do the same with
the lower hinge.
6. Flip the top hinge 180 degrees
and reattach the the hinge on the
diagonally opposite corner of the
appliance cabinet as shown in fig. 13
7. Swap the previous bottom hinge to
the opposite side at the top.
Refit the upper door and the "new"
top hinge and fix securely to the
appliance. Repeat this process for the
bottom door if necessary
8. Fit the central cover caps and top
hinge cover pieces in place to
complete the process.
22
Fig. 13