RECA 10 PD Instrucciones De Uso página 11

damaged
Ÿ Never submerge the product in water or
other liquids. Never touch a device that
is connected to the mains if it has fallen
into water. In this case, remove the mains
plug immediately.
Ÿ Failure to observe the safety instructions
can result in dangerous injuries to per-
sons or damage to the device!
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLA-
CED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
USE
CAPACITY INDICATION
Press the power button to check the energy remaining.
Ÿ 4 LEDs illuminate:
Ÿ 3 LEDs illuminate:
Ÿ 2 LEDs illuminate:
Ÿ 1 LED illuminates:
Ÿ No LED illuminates:
Please charge the POWERBANK immediately. If the POWERBANK will not be used for
an extended period of time, it is necessary to charge it before storage in order to avoid
the rechargeable battery being damaged.
CHARGING THE POWERBANK
TYPE C
Insert the type-C plug of the USB cable into the type-C socket on the POWERBANK and the
USB plug into the USB port on a computer or a USB charger.
The charging process starts automatically. During the charging process, up to 4 white
LEDs indicate the charge progress. After the charging process is complete, all 4 white
LEDs illuminate steadily.
CHARGING DEVICES
Please use a suitable type-C cable for this. Insert the USB / type C plug of the cable
into the POWERBANK and the other end into your device. The charging process starts
automatically.
The POWERBANK has Quick Charge 3.0 and a Power Delivery (PD) protocol. To use this
technology, please check whether your device is Quick-Charge-capable or supports
Power Delivery (PD). Please refer to this information from the product information or
operating instructions of the respective manufacturer or the Internet.
Simultaneous charging of multiple end-devices is possible with restrictions. This
75% - 100%
50% - 75%
25% - 50%
1% - 25%
The POWERBANK is completely
discharged.
11