nance or safety of this device, please contact a qualified person or our service centre.
4. Contents
• Gardigo Mouse-Ant- Repellent, Duo
• 6 V DC/200 mA power supply
• Instruction manual
5. Getting Started
The Mouse-Ant- Repellent, Duo offers two different functions:
The device can emit ultrasound in the frequency range between 25.000 - 65.000 Hz and
pressure waves. The frequency of the ultrasonic signal varies automatically, preventing
the animals from getting used to the irritating sound, and is emitted through the two
speakers at the side of the device [ ]. The variation of the frequencies is required, so
that the animals do not get accustomed to the irritating sound. Pressure waves are
emitted through an additional driver at the front of the repeller [ ]. Animals perceive
ultrasound and pressure pulses subconsciously at first, but after a short period of time
they will begin to feel uncomfortable and threatened. This will make them leave the
area to look for a more pleasant place to settle down. The two functions can be activa-
ted individually or concurrently using the 4-position switch at the bottom of the device.
Setting up the device:
• Connect the repellent to the supplied power supply by using the input at the bottom
of the device [ ].
• Insert the power supply into a 230 V mains plug. The repellent is now active.
• Choose the mode you wish to use with the 4-position switch.
4-position switch [ ]:
TEST (2.1): The TEST position allows you to check the function of the device. You will
hear an audible tone and the red LED lights up [ ].
ULTRA (2.2): This position activates the varying ultrasonic sound. Ultrasonic frequenci-
es are not audible to the human ear. The activation is confirmed when the red LED [ ]
lights up.
TRANS (2.3): This position activates the compressed impulse waves. These are barely
audible to the human ear. The activation is confirmed when the green LED [ ] lights up.
DUO (2.4): This mode allows you to use the ultrasonic frequencies as well as the com-
pressed impulse waves. In this mode the green and the red LED will light up.
11