First Use And Storage - Vermeiren One Manual De Instrucciones

5. Fold the steering column down (see §3.5.1).
6. Pull the release lever (1) and separate the front and rear frame from each other.
To assemble:
1. Attach the front and rear frame to each other by pulling the front frame hooks over the rear
frame tube.
2. Fold the steering column up (see §3.5.1).
3. Mount the shopping basket.
4. Mount the battery pack.
5. Mount the seat (see §3.5.2). Make sure it is securely fixed into place.
6. Place the freewheel lever in drive mode (see §3.4).
2.6

First use and storage

CAUTION
• Never completely discharge the battery.
• Do not interrupt the charging cycle; only disconnect the battery charger when the battery is
fully charged.
• Make sure that your scooter is stored dry and indoors to prevent mould from growing and the
upholstery from being damaged. If necessary, use a protective cover.
• Check the technical details for storage, see chapter 6.
Ensure that the battery has been fully charged before using your scooter, ask your dealer if this
has already been done or not. To charge, follow the charging instructions in §3.6.
Risk of battery damage
7
EN
One
2022-09
Before use
NL