Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting Monitor Brackets to a Television with a Flat Back
NOTE: For televisions with a curved or recessed back, proceed directly to next page.
24. Determine the correct diameter of the bolt the TV requires by hand threading them into the
threaded insert on the back of the TV. If you encounter any resistance, stop immediately. If
you are unable to find the correct bolt, consult a local hardware store.
25. Follow the appropriate diagram above to attach the Monitor Brackets (L) to the back of the TV
with selected fasteners. Make sure the Monitor Brackets are centered and level with each
other. Secure the bolts with a Phillips Screwdriver. DO NOT over tighten the bolts.
NOTE: Lean the TV up against a wall or other solid surface when attaching the Monitor
Brackets. DO NOT place the TV face down on the glass as this may cause permanent damage.
NOTE: If mounting your TV in the Wall Mount configuration, once you have completed the
installation of the monitor brackets, proceed to PAGE 21
TV
17
Publicidad
