Publicidad
Idiomas disponibles
Idiomas disponibles
C
D
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,
go back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Locate the Spine Assembly (D) and set back face down on a scratch free surface, as shown.
3. Align and attach 2 lower Shelf Frames (B and C) to the Lower Spine with four 1" Bolts (4). Make
sure that the inside corner plates on the shelf frames will face up when the unit is turned upright.
Assembly Instructions
B
C
4
(4 used in this step)
D
1" Bolt
④
5
4
B
D
UP
Publicidad
