Maintenance - Skil PED0900 Manual Del Propietário

MAINTENANCE

WARNING
WARNING
ventilation slots clean.
Cleaning the Edger
a. Remove the battery pack. Clear any grass that may have wrapped itself around the blade
hub. Keep the air vents free of obstructions.
b. Always use only a soft, dry cloth to clean your edger attachment; never use detergent or
alcohol.
Storing the Edger
a. Remove the battery pack.
b. Clean the tool thoroughly before storing it.
c. Store the unit in a dry, well-ventilated area, locked-up or up high, out of the reach of
children.
d. Keep away from corrosive agents, such as garden chemicals and de-icing salts.
Replacing the Blade
WARNING
identical edger blade .
WARNING
on the edger blade .
NOTICE: Replace the blade if its length is no longer sufficient to maintain the necessary
ground clearance and obtain the required depth of cut.
Removing the blade
a. Stop the tool and remove the battery pack.
b. Lay the edger on its back so that the blade
is facing upwards.
c. While wearing protective gloves, rotate
the blade until the slot in the blade hub is
aligned with the groove (Fig. 6a).
All maintenance should only be carried out by a qualified service
technician .
Before cleaning or performing any maintenance, remove battery from
the tool . For safe and proper operation, always keep the tool and its
Do not attempt to straighten or weld a bent or cracked blade as it
might break . Such a blade must be replaced . Replace only with
Always protect your hands by wearing heavy gloves or wrapping the
blade with rags or other materials when performing any maintenance
Fig . 6a
Blade
Slot in the
blade hub
Groove
15