Publicidad
X1s- Manual
What is that sound???
When the Smartgyro X1s needs your attention or encounters an error, it will emit a series of warning beeps to let you know.
This could be for the following reasons:
• You fell off the Smartgyro X1s. The Smartgyro X1s will be able to sense when you unexpectedly dismount and will emit the warning
beeping to let you know its sensors have been thrown out. Place the Smartgyro X1s on a smooth and flat surface, then turn the Smart-
gyro X1s off, then on again.
• You activated the speed alarm. The Smartgyro X1s has an inbuilt speed alarm that will sound when you are moving faster than 10km per
hour. Reduce your speed to deactivate the speed alarm. See speed restrictions below.
• The Smartgyro X1s has low-battery. he Display Panel will show a red Battery Icon alerting you to the fact that you should charge your
Smartgyro X1s.
• The Smartgyro X1s's motors are overheating. This is usually caused by pushing the Smartgyro X1s outside of its optimal conditions e.g.
riding uphill or over uneven terrain. Please allow the Smartgyro X1s to cool down.
Charging your smartGyro
Remove your Smartgyro X1s from its packaging and place it on a steady surface for charging.
Ensure that the charging port of the Smartgyro X1s is clean and dry. Make sure that there is no dust, debris or dirt inside the charging port.
See Product Diagram for charging port location. Use the included Smartgyro X1s wall-charger and connect the Smartgyro X1s to a suitable
power point. Use the appropriate cable provided for your region.
NB: Using a non-provided cable will void your manufacturer warranty and may cause serious product failure.
The indicator light on the Smartgyro X1s charger should change to RED, indicating that your Smartgyro X1s is now charging. When the
RED indicator light on your Smartgyro X1s charger turns to GREEN, your Smartgyro X1s is fully charged.
For first-time use, please charge for approximately 2 hours as your Smartgyro X1s has been manufactured with some residual power
stored. When you go to next charge your Smartgyro X1s from flat, a full charge will take approximately 3 hours. DO NOT leave unatten-
ded or over-charge the battery for more than 3 hours.
EN
19
smartgyro.es
Publicidad
