Publicidad
Idiomas disponibles
Idiomas disponibles
Using the units
•
Insert batteries into both devices (observe polarity!).
Use 1.5V AAA alkaline batteries (in the parent unit 3 pieces, in the
baby unit 4 pieces, not included).
or
Connect the supplied power adapter to one device and plug it into a
suitable power outlet.
•
Slide the on / off switches on both devices to the "ON" position.
•
Wait for about 2 s. When the connection is established, the volume
LEDs on the parent unit flash briefly.
•
Place the baby unit in the baby room about 2 meters away
from the baby.
•
Use the volume control on the parent unit to set the desired
volume. The volume LEDs indicate the set volume.
•
If the baby unit does not detect any sounds in the surroundings,
the transmitter is switched off; the parent unit is then in standby
mode (VOX). When the baby unit perceives noises again, the
transmitter is switched on again and the transmission to the parent
unit starts.
9
Publicidad
