Package Contents - Grandstream Networks GWN7624 Guía De Instalación Rápida

OVERVIEW
EN
The GWN7624 is an in-wall Wi-Fi access point designed for small-to-
medium sized businesses, offices, residential, commercial locations,
hotels and more. It provides three Gigabit network ports to provide IP
phones, IPTV, computers and similar devices with Ethernet while also
providing and uplink Gigabit network port with PoE/PoE+. The GWN7624
offers 4×4:4 MU-MIMO technology and a sophisticated antenna design
for maximum network throughput and expanded Wi-Fi coverage range.
To ensure easy installation and management, the GWN7624 uses a con-
troller-less distributed network management design in which the control-
ler is embedded within the product's web user interface. The GWN7624
is also supported by GWN.Cloud and GWN Manager, Grandstream's free
cloud and on-premise Wi-Fi management platform. It is the ideal Wi-Fi
AP for voice-over-Wi-Fi deployments and offers a seamless connection
with Grandstream's Wi-Fi capable IP phones. With support for advanced
QoS, low-latency real-time applications, mesh networks, captive portals
and 200 concurrent clients per AP, the GWN7624 is an ideal Wi-Fi ac-
cess point for medium wireless network deployments with medium user
density.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of -10 °C to
50 °C for operating and -30 °C to 60 °C for storage.
• Do not expose the GWN7624 to environments outside of the follow-
ing humidity range: 5-95% RH (non-condensing).
• Do not power cycle your GWN7624 during system boot up or firm-
ware upgrade. You may corrupt firmware images and cause the unit
to malfunction.

PACKAGE CONTENTS

1x GWN7624 Access Point
2x Screws
1x Screw
(PM2.5*6*4mm)
(KB 2.6*6)
4x Screws
1 x Quick
(KB 3.5 * 26)
Installation Guide
~1~
GWN7624 PORTS
Port Description
PoE IN Ethernet RJ45 port (10/100/1000Mbps) supporting PoE/PoE+.
LAN 1 1x 10/100/1000Mbps Ethernet port.
LAN 2 2x 10/100/1000Mbps Ethernet ports with PSE.
LAN 3
Notes:
• The maximum output of each PSE port is 6W.
• If powered by PoE+, both LAN 2(PoE OUT -B) and LAN
3(PoE OUT -A) can be used as PSE.
• If powered by PoE, only LAN 3(PoE OUT -A) can be used
as PSE.
RESET Factory reset pinhole.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7624
GWN7624 can only be powered on using PoE/PoE+ switch using following
steps :
Step 1: Plug a RJ45 Ethernet cable into the PoE IN network port of
GWN7624.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
~2~
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch