Initial Set-Up - Palazzetti ET4W Uso Y Funciones

Status LEDs
Icon Description
Connection mode:
• LED off: device operating in Access Point mode;
• LED always on: device configured to connect to the home network.
Operating mode:
• LED always on: parameters can be changed;
• LED off: display parameters cannot be changed.
2

INITIAL SET-UP

1. Set dip switches
Before proceeding with use of the ,it is necessary to activate/deactivate the dip switches as
required. See paragraph "3.1 Dip switch" on page 20.
2. Connect the control unit to the network
To facilitate management of the product operating parameters, it is possible to connect the
product to the network and/or use the Palazzetti App. For instructions, see the paragraph "3.2
Connection to the Wi-Fi network" on page 20.
3. Connect radio devices (optional)
In addition to the Palazzetti App, the remote control is optionally available, which allows remote
management of the appliance parameters. See paragraph "5 Remote control (optional)" on
page 27 for the instructions for use.
004779060 - 27/06/2022
ITALIANO ENGLISH DEUTSCH FRANÇAIS ESPAÑOL
19