Wall Installation - Palazzetti ET4W Uso Y Funciones

If the password of the router or the connectivity provider are changed, it will be necessary
to reset the control panel according to the following procedure:
• Access the Infomenu - screen 2 on the display
• Press the key of the control panel and hold it for 4 seconds until you hear a "beep".
The control panel will then start the restart process moving back to access-point mode.
It will now be possible to re-connect to the router using the App.

3.3 Wall installation

The panel is provided with a series of adaptors which allow the installation of the most common
plates; below the list of such adapters:
• BTicino Living
• BTicino Axolute
• GEWISS Top System
• GEWISS Chorus
• VIMAR Idea
• VIMAR Eikon
• VIMAR Plana
• ABB Chiara
004779060 - 27/06/2022
ITALIANO ENGLISH
Fig. 5
DEUTSCH FRANÇAIS
Station Mode
After configuring access to the Wi-Fi net-
work, the product will be in Station Mode
configuration.
ESPAÑOL
21