Publicidad
Idiomas disponibles
Idiomas disponibles
Specification
Product Code:
Dimensions (L x W x H):
Max Load:
Weight:
As part of our ongoing product development, specifications of
Triton products may alter without notice.
General Safety
Carefully read and understand this manual and any label attached
to the product before use. Keep these instructions with the product
for future reference. Ensure all persons who use this product are
fully acquainted with these instructions.
WARNING: This product is not to be used as a stand or platform.
WARNING: ALWAYS store your heaviest tools in the lowest
possible box to prevent the stackable storage system becoming
unbalanced and falling. (Fig. I)
IMPORTANT: ALWAYS engage the Wheel Locks (8) when storing the
stackable storage system using the Wheeled Base.
IMPORTANT: Never exceed the maximum load capacity of this
product.
Product Familiarisation
1. Wheeled Base Tray
2. Large Storage Box w/ Lid
3. Medium Storage Box w/ Lid
4. Tool Carry Box
5. Tool Tray
6. Multi Box Locking Clip
7. Multi Box/Lid Locking Clip
8. Wheel Lock
9. Wheel
Intended Use
Stackable storage system with locking wheels for storing tools. Can
be arranged in a variety of combinations for multiple uses. Not to be
used as a platform.
GB
6
Original Instructions
MAX
80
kg
TSTSS
485 x 335 x 755mm
80kg
7.9kg
Unpacking Your Product
• Carefully unpack and inspect your product. Fully familiarise
yourself with all its features and functions
• Ensure all parts of the product are present and in good condition.
If any parts are missing or damaged, have such parts replaced
before attempting to use this product
Assembly
Using the Locking Clips
Attaching the tool tray
• Lift the Multi Box Locking Clip (6) and click into place to attach a
unit above (Fig. II)
Locking the storage box lids
See Fig. III
• If extended, retract the upper part of the Locking Clip
• Close the Lid and attach the upper part of the Clip onto the Lid
• Push the lower part of the Clip inwards to lock the Clip and
secure the Lid
Attaching the units together
See Fig. IV
• Lift the lower part of Multi Box/Lid Locking Clip (7) to unlock (Fig.
IV)
• Extend the upper part of the Clip so it will reach over the Clip on
the unit above (Fig. IV)
• Attach the upper part of the Clip to the unit above and push the
lower part of the Clip inward to lock in place (Fig. IV)
Note: Repeat process for all Clips required to secure Lid/Units
before attempting to load or transport the stackable storage system.
Locking/unlocking the Wheels
• To lock the Wheels (9) press the 2 x Wheel Locks (8) downward.
Raise to release
Disposal
• Tools may contain traces of tool oil, other lubricants and
pollutants. Therefore, tools should not be disposed of with
household waste
• Contact your local waste disposal authority for information on the
correct way to dispose of this tool
Publicidad
