Publicidad
Idiomas disponibles
Idiomas disponibles
- Check the state of the power cord. Damaged or
tangled cables increase the risk of electric shock.
- Do not touch the plug with wet hands.
- Use clamps or a vise to secure the object to be
worked in place. The work will be safer if both
hands are free to control the tool.
- Do not touch any of the appliance's moving parts
while it is operating.
- Fully unroll the appliance's power cable before
each use.
- Keep hands and other body parts well away from
the work area whist the tool is in use.
- Do not use the appliance if its accessories are
not properly fitted.
- Do not use the appliance if the accessories or
consumables attached to it are defective. Replace
them immediately.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- This appliance is for household use only, not
professional, industrial use.
- This appliance is intended for adult use. Ensure
that this product is not used by the disabled, chil-
dren or people unused to its handling.
- This appliance is not a toy. Children should be
supervised to ensure that they do not play with the
appliance.
- Do not expose the appliance to extreme tempera-
tures.
- Do not expose to extreme temperatures or strong
magnetism.
- Keep the appliance in a dry, dust-free place, out
of direct sunlight.
- Always check the workpiece before operation and
remove any obstructions such as nails, staples,
screws, string, rags, cloths and other debris.
- Only use the appliance for carrying out dry tasks.
- Do not use the appliance on any part of the body
of a person or animal.
- Let the appliance running with no load for 30
seconds in a safe position. If you notice serious
vibration or other defects stop the appliance imme-
diately. Then check the problem and /or proceed
as we describe on Anomalies and Repair clause.
- The appliance can be used on surfaces such as:
wood, cardboard, plastic, plaster, etc.
Instructions for use
Before use:
- Make sure that all the product's packaging has
been removed.
- Ensure that the voltage indicated on the rating
label matches the mains voltage before plugging in
the appliance.
- Before using this product for the first time, it is
important to make a full charge of batteries.
- Prepare the appliance according to the function
you wish to use:
AUXILIARI OPERATION
- When working always use the auxiliary handle
(G)
- The drilling depth can be set according to your
needs. Push the depth stopper until it marks the
depth you need to drill. The best way is to make a
drilling first and adjust the depth stopper.
INSERTING A BIT
- To open the drill's chuck, use the chuck key (I)
and rotate it counterclockwise.
-
Insert the bit inside the chuck
-
Use the chuck key to close the drill
chuck and ensure the drill bit.
Screwing, drilling/unscrewing:
- To drill or screw, ALWAYS have the direction set
to clockwise (CW).
- To unscrew, set the direction to counter clockwise
(CCW).
- The appliance should not be in use when chang-
ing the screwing direction.
How to select the direction of the rotation (Fig
A)
- Do not change the direction of the rotation whilst
the tool motor is in operation.
- The appliance has a selector (D), which allows
the direction of rotation to be changed.
Electronic speed control: (Fig A)
- The speed of the appliance can be regulated
according to the pressure exerted on the on/off
switch (A). This function is very useful, as it makes
it possible to adapt the speed of the appliance to
the type of work that needs to be done.
- If the appliance works continuously at low speed,
working life of the appliance will be reduced con-
siderably.
Select the function (Fig A)
Drilling
- Turn the selector (E) until points to ( ).
Drilling with Impact Function
- Turn the selector (E) until points to ( )
Use:
- Connect the appliance to the mains.
- Select the appliance function desired.
- Select the desired speed.
- Turn the appliance on, by using the on/off button
(A)
Publicidad
