Maintenance guide
Emptying the dust cup
Ensure the stick vac is switched off and
any attachments are removed before
emptying the dust cup.
1. Hold the cup assembly over a
household bin and push the dust
release latch on the side of the dust
cup. The debris will fall out into the
bin. Please note: Do not allow the
dust cup to overfill. Don't exceed the
MAX level marker. Empty regularly.
Every time you empty the dust cup,
check the filter assembly and tap
gently over the household bin to
remove any excess dust.
2. Once empty close the lid until it clicks
shut.
Removing and cleaning the dust cup
and filters
Before starting any cleaning, ensure the
stick vac is not charging and is switched
off. It is easier to remove the dust cup
without any attachments on the stick
vac.
1. Empty the dust cup as shown in the
'Emptying the dust cup' section of this
manual.
2. Press the dust cup release button
located on the side of the main body
near the bottom of the dust cup (1).
Then pull the dust cup away from the
main body, keeping the cup fairly
upright (2).
8
1
2