Fifine K669 Guia Del Usuario página 3

STAND INSTALLATION AND ADJUSTMENT
1. If necessary, adjust the microphone's angle
with the pivotMount's thumbscrew.(turn left
for loosen ,turn right for tighten)
Front Rear
2. Pls Swing the microphone counterclock-
wise, Swing the microphone clockwise will
cause the bracket broken.
3
3.Screw the pivot mount to adjust microphone angle 360° horizontally.
SPECIFICATION
Power Supply: 5V
Polar Pattern: Unidirectional
Frequency Response: 20Hz-20KHz
Sensitivity: -34dB±30%(at 1kHz)
Load Impedance: 1000
Equivalent Noise Level: 16dB-A
Max.SPL: 130dB(at 1kHz≤1% T.H.D)
S/N Ratio: 78dB
Electrical Current: 3mA
COMPUTER SETUP
Apple MAC OS
1. Plug the free end of the provided USB cable into the USB port on your computer.
indicating the microphone is receiving power. Your computer will automatically recognize
the USB device and install a driver.
2. To select the K669 as your audio input, rst, open your System Preferences.
4