Installation Instruction; Handlebar Installation - KAISDA K2 Manual De Instrucciones

3. The red light means the battery is charging, and the green light means thebattery
is fully charged (wait for 30 minutes after the green light of the charger is displayed
before unplugging it).Charging time depends on the battery capacity, the general
charging time is 4-6 hours.
Do not charge for more than 10 hours. Keep away from high temperature
4. Warning:
environment and store in a cool place.
6 . Installation instructions
1. Open the carton of the electric bicycle, take out the electric bicycle, and cut off the
wrapping rope with tools.
2.

Handlebar installation

2.1 Open the folding buckle of the riser. After the riser is aligned with the slot of the
riser, lock the quick disassembly rod (note: it must be completed in the folded state).
2.2 Raise the riser to lock the folding handle and then fasten the protective sleeve
into the clamping slot of the folding handle.
2.1
3.
Headlight& fenders installation:
3.1 Loosen the headlight screw from the front fork;Install the headlight into the
screw hole of the front fork and tighten the screw with the hexagon tool.
:
2.1 2.1
-4-
2.2 2.2