Publicidad
Idiomas disponibles
Idiomas disponibles
Chapter 2 Setting Up Your Printer
Preparing a Location for the Printer
Dimensions
Installation
Precautions
STOP
8
Printer Height: 498 mm (19.6 in)
Printer Width (left to right): 640 mm (25.2 in)
Printer Depth (front to back): 525 mm (20.7 in)
Before unpacking your laser printer, it is recommended that you read the
following to assist in locating a suitable spot for your new laser printer. To make
optimum use of the printer, observe the following precautions when locating the
printer.
The installation surface must be stable and very sturdy to support the considerable weight of the
printer. If the printer falls over, there is a severe risk of injuries.
Always keep the printer under the following conditions:
Temperature: 5 to 35º C (41º to 95º F)
Humidity: 15 to 85% (non-condensation)
Be sure to keep the temperature below 28º C (82º F) if the humidity is 85%. If
the temperature changes drastically from a cold environment to a warm envi-
ronment, condensation may develop inside the printer and cause print prob-
lems. Therefore, be sure to let the printer rest for some time to adjust to the
new temperature.
Do not subject the printer to direct sunlight or a malfunction may result.
Do not place the printer in a location with poor ventilation, or high level of
dust, otherwise a fire hazard or electric shock may result.
Do not place the printer near heaters or similar objects, otherwise a fire hazard
may result.
Never block the ventilation openings of the printer, otherwise the internal tem-
perature will build up and cause a fire hazard.
Do not place the printer near alcohol, benzine, or other volatile and flammable
materials, or a fire hazard may result.
Quick Start Guide
Publicidad
