Configuration; Setting An Ip Address Manually - Tally Genicom 9050N Guia De Instalacion

Quick Start Guide
Printing a

Configuration

Summary

Setting an IP address manually

3 Select Front Panel Language, then press the OK button.
4 Select the desired language, then press the OK button.
Your printer can print a configuration summary that lists the currently selected
menu options, media selections in trays, options installed and other relevant
information about your printer. To print a Configuration Summary, press the
INFO key.
If you need to set an IP address manually, as opposed to letting the printer receive
one automatically from a DHCP source, then you must ensure that DHCP is
turned off. Use the following procedure to turn DHCP off.
1 Press the MENU button on the control panel.
2 Press the NEXT button until "Interface
Menu" is shown on the second line of the
display.
3 Press the SELECT button to enter the interface menu.
4 Press NEXT until "Network 1 Setup" is
shown on the display.
5 Press SELECT.
6 Press NEXT until "DHCP" is shown on
the display.
7 Press SELECT.
Chapter 2 Setting Up Your Printer
Menu
Interface Menu
Interface Menu
Network 1 Setup
Network 1 Setup
DHCP
21