Publicidad
Idiomas disponibles
Idiomas disponibles
ZH320 Ec
6
Service and maintenance
MAFELL machines are of a low-maintenance design.
The installed ball bearings are lubricated for life. After a longer period of operation, MAFELL recommends that
the machine be handed over to an authorized MAFELL service workshop for inspection.
6.1 Tool
The resin on the blade unit used in the machine (clamping jaws, blade carrier and blades) should be removed
at regular intervals. Clean tools improve the planing quality.
To remove the resin, soak the blade unit for 24 hours in kerosene or a commercially available resin-removing
agent.
To remove resin from aluminum tools, use only solvents that do not attack aluminum.
6.2 Storage
Clean the machine thoroughly if you will not use it for quite some time. Spray bare metal parts with a rust
inhibitor.
11/2021
19
Publicidad
