If there is no suitable, earthed wall socket available, have one installed by a
recognized electrician.
Do not move/repair the unit yourself.
Before proceeding with any maintenance, service or repair work, the product must
be isolated from the mains electrical supply. Only qualified personnel should carry
out these tasks. Improper movement or repair on the unit could lead to water
leakage, electrical shock, injury or fire.
Do not install the unit in a place where there is a chance of flammable gas leaks.
If there is a gas leak and gas accumulates in the area surrounding the unit, it could
cause an explosion.
Perform the drainage/piping work according to the installation instruction.
If there is a defect in the drainage/piping work, water could leak from the unit and
household goods could get wet and be damaged.
Do not clean the unit when the power is 'ON'.
Always shut 'OFF' the power when cleaning or servicing the unit. If not, it
could cause an injury due to the high speed running fan or an electrical shock.
Do not continue to run the unit when there is something wrong or there is a strange
smell.
The power supply needs to be shut 'OFF' to stop the unit; otherwise this may
cause an electrical shock or fire.
Do not put your fingers or others into the fan, or evaporator. The ventilator runs at
high speed, it could cause serious injury.
5
V.1