Publicidad
Idiomas disponibles
Idiomas disponibles
Power
indicator
Wi-Fi
indicator
Communica-
tion indicator
Configuration
button
1.4 The connection of Wi-Fi kits
Typical application 1:
Controller still is fixed on the unit casing, and only Wi-Fi module
is fixed other site as you needed.
Please disconnect the cable of controller and PCB through the
connectors. Cable I is connected with the cable from PCB and
connected with controller and Wi-Fi module. After connecting,
please put Cable I and cable of controller including the connectors
in the heat pump unit.
Typical connection 2:
Controller and Wi-Fi module are fixed other site together as you
needed.
After the unit power on, the indicator
will be lighted.
1. During Wi-Fi configuration, the indicator
will be kept flashing.
2. After connecting with Wi-Fi, it will be
lighted.
3. The indicator will be extinguished
without internet connection.
When
the
communication
between the Wi-Fi module, controller and
unit, it will be lighted. Otherwise, it will be
extinguished.
Press the button for 3 seconds to begin to
Wi-Fi configuration.
4
is
normal
V.1
Publicidad
