Transport; Assembly; Check Scope Of Delivery; Workplace Conditions - HOLZMANN MASCHINEN GBM25 Manual De Instrucciones

Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety note designed in this way indicates a potentially dangerous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, your common sense and your corresponding technical
suitability/training are and will remain the most important safety factor for error-free operation of
the machine. Safe working depends first and foremost on you!

TRANSPORT

Damaged or not sufficiently viable hoists and lifting devices can cause serious injury
or even death. Always check hoists and load lifting devices for adequate load-bearing
capacity and perfect condition, carefully fasten the loads and never keep them under
suspended loads.
Attach the lifting belts to the bottom of the forks and pay attention to a balanced weight
distribution.

ASSEMBLY

Due to the high weight, there is an increased risk of squeezing and tipping during
assembly, which can result in serious injuries or even death. The gear driven drill
press therefore requires at least two people for assembly.

14.1 Check Scope of Delivery

After delivery, check the machine immediately for transport damage and missing Parts.

14.1.1 Workplace Conditions

Choose a flat, solid surface. Check the horizontal alignment of the substrate with a water scale.
The Place must also meet the ergonomic requirements for a workplace.

14.1.2 Attach Machine

The fastening screws, which are too attracted, in combination with an uneven
surface, can lead to the rupture of the base of the machine. Only tighthen the
fastening screws to ensure safe anchoring and prevent the machine from tilting!
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
C A U T I O N
N O T I C E
W A R N I N G
W A R N I N G
N O T I C E
TRANSPORT
23
GBM25; GMB25T