Operation; Start / Stop Set Direction Of Rotation; Gear Lever - HOLZMANN MASCHINEN GBM25 Manual De Instrucciones

OPERATION

• Check the proper condition of the security devices before each use.
 Control the joints at least weekly.
• Check regularly the condition of the machine's warning and safety stickers
15.1 Start / Stop
15.2 Set Direction of Rotation

15.3 Gear Lever

Changing the speed level for rotating drill spindles can damage the machine. Before
changing the speed level turn off the machine and wait for a standstill of the drill
spindle!
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
N O T I C E
On/Off-switch:
 Start : press green button (I)
 Stop: press red button (O)
Emergency Stop:
Press emergency stop button only in case of emergency. The locking of
the button remains in place until it is manually unlocked.
Direction rotation switch.
The direction of the machine can be set by the direction rotation switch.
»R« means right direction (clock-wise), »L« means left direction
(counterclock-wise). For each direction two spindle speed levels are
available (1R, 2R bzw. L1, L2).
N O T I C E
Selection of the spindle speed: Corresponding to
position of the gear lever in the table and the position of
the direction roation switch (1 or 2) the spindle speed can
be selected.
OPERATION
25
GBM25; GMB25T