Overmax Multipic 3.6 Manual De Usuario página 16

Introduction
Dear customer!
EN
Thank you for placing trust in us and choosing Overmax.
Thanks to the use of high-quality materials and modern solutions, we provide
you with a product perfect for everyday use. We are convinced that the product
will satisfy your requirements as it has been manufactured with utmost care.
Before you use the product, please read this operating manual carefully.
Should you have any remarks or questions concerning the product, please do
not hesitate to contact us: pomoctechniczna@overmax.pl
Important information
Before using the projector, please read and then follow the instructions in this
guide. Improper operation of the device can lead to electric shock and increase the
risk of fire. Follow these instructions when using and maintaining your projector.
Note
Installation and use
• For better image quality, use the projector in rooms with drawn curtains
or in dark rooms.
• Use the projector carefully. Dropping or malfunctioning may damage parts
or cause image blurring and incorrect display.
• Do not disassemble the device yourself – risk of electric shock.
• Protect the device from moisture and keep it away from water or other
liquids.
• When the projector is switched on, make sure that the ventilation holes
of the device are not obstructed. Do not place it on soft surfaces or cover
it with materials.
• Use only the supplied cables.
• Be careful when using the power cord, avoid excessively bending the cord;
damage to the power cord can cause electric shock or fire.
• Do not look into the lens while the device is running.
• It is recommended to switch off the appliance after 6 hours of uninterrupted
operation.
• Disconnect the power cord after switching off the power.
• It is recommended to use the original packaging for transporting the device.
• When the projector is switched on, make sure that the ventilation holes
of the device are not obstructed. For this reason, it should not be placed
on soft surfaces or covered with materials.