Technical Data; Standard Accessories; User Responsibility; 550X600 Mm - Elektra Beckum BAS 450 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Contens
1

Technical Data

2

Standard Accessories

3

User Responsibility

4
Safety Rules for Band Saws
5
Initiation
1
Technical Data
Max. height of cut
Throat capacity
Saw blade length
Saw blade width
Saw table size
Saw table tilt
Blade speeds 50 Hz
60 Hz 82-211-450-1160 m/min
Height
Width
Depth
Table height from floor
Weight
Motors
1.1 kW/1.5 hp 115 V
1.1 kW/1.5 hp 220/240 V
1.5 kW/2.0 hp 220 V
1.5 kW/2.0 hp 380/415 V
Check motor label and mark motor model of your saw above.
2
Standard Accessories
2.1 General purpose blade 3380x15x0.5 mm, tooth spacing 6 mm
2.2 Rip fence
2.3 Adaptor 100 mm diameter for connection of dust extractor
2.4 Instruction manual
2.5 Allan key SW 3 mm
3
User Responsibility
This machine will perform in conformity with the description contained in the manual when installed, operated,
maintained and repaired in accordance with the instructions provided.
This machine must be checked periodically. Defective equipment (including service leads) should not be used.
Parts that are broken, missing, plainly worn, distorted or contaminated, should be replaced immediately. Should
such repair or replacement become necessary, it is recommended that such repairs are carried out by qualified
persons approved by the equipment manufacturer or its representative.
This machine or any of its parts should not be altered or changed from standard specifications. The user of this
machine shall have the sole responsibility for any malfunction which results from improper use or unauthorized
modification from standard specifications, faulty maintenance, damage or improper repair by anyone other than
qualified persons approved by the equipment manufacturer or its representatives.
Note
The information contained in this manual is intended to help the owner/operator of this band saw with the set-up
of the machine and setting of cutting speeds, fences and guards.
It is not a maintenance manual for servicing and repair nor does it teach the operator how to become an expert
woodworker.
330 mm
440 mm
3380 mm
6 - 25 mm
550 x 600 mm
stepless from 90° to 45°
68-176-375-967 m/min
1920 mm

845 mm

745 mm
926 mm
127 kg
50/60 Hz 1-phase
50/60 Hz 1-phase
50/60 Hz 3-phase
50/60 Hz 3-phase
6
Operation
7
Additional Safety Rules
8
Spare Parts Lists
9
Optional Accessories
2
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido