Infiniton WM-62MC Manual De Usuario página 47

Check the inlet hose regularly for brittleness and cracks and replace it necessary.
The washing machine can be connected without a non-return valve.
For Models with Single lnlet
Fix the inlet hose to the cold water tap
and to the inlet valve on the rear side
of the machine as Fig. 1
For Models with Dual lnlets
lf you wish to connect hot and cold
water supply (Fig.2):
• Fix the red marked inlet hose to the
hot water tap and to the inlet valve with
the red filter on the rear side of machine.
• Fix the other inlet hose to the cold water
tap and to the inlet valve with the blue filter
on the rear side of the machine.
Make sure:
3. The connections are tightly fixed
4. Do not invert their position (for
example: cold fill into hot inlet valve
and vice versa).
lf you wish to connect only the cold fill
follow the below instructions (Fig. 3):
5. You need a Y-piece connector. This can be
purchased from local hardware or plumbing
supplier
6. Fix the Y-piece connector to the cold fill tap.
7. Connect the two inlet valves present on the
rear part of the machine to the Y-piece
connector using the hoses provided.
10
10
Fig.1
Fig.2
Fig.3