Grandstream GRP2615 Manual Del Usuario página 4

PH ON E SET U P:
Slot for the wall
mount spacers
and phone
stand
Kensington
Lock
USB Port
PC Port
LAN Port
Installing the phone (Wall Mount *sold separately):
1. Attach the wall mount spacers to the slot for wall mount spacers on the back
of the phone.
2. Attach the phone to the wall via the wall mount hole.
3.
4. Rotate the tab and plug it back into the slot with the extension up to hold the
Wall mount
Installing the phone (Phone Stand):
For installing the phone on the table with the phone stand, attach the phone stand
to the bottom of the phone where there is a slot for the phone stand. (Upper half,
bottom part).
Wall mount
Phone Stand
Headset Port
Handset Port
Power
Tab with exten-
Handset Rest
sion up
Tab with exten-
sion down
CON N ECT I N G T H E PH ON E:
To setup the GRP2615, follow the steps below:
1. Connect the handset and main phone case with the phone cord.
2. Connect the 12V DC output plug to the power jack on the phone; plug the
power adapter into an electrical outlet. If PoE switch is used in step 3, this
step could be skipped.
3. Network connection is possible via two methods which are described below:
• Using Ethernet:
Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a
router (LAN side of the router) using the Ethernet cable.
• Using WiFi:
- Select "Scan" and GRP2615 will automatically start scanning within the
range.
- A list of WiFi networks will be displayed. Select the desired network, and if
required, enter the correct password to connect.
4.
continuing, please wait for the date/time display to show up.
5.
PH ON E DESCRI PT I ON :
Line keys
MENU/OK key
Standard
keypad
Send
Soft keys
Navigation keys
Message
Hold
Transfer
Headset
Mute
Volume
Speaker
~4~