Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
‰ Turn the escutcheon until it is fully retracted into the ball joint.
‰ Using the included wrench, turn the bodyspray onto the nipple until it is snug.
NOTE: A 1/2" driver can be used with the included wrench to increase leverage.
‰ Turn the bodyspray head clockwise to the fully closed position.
NOTE: The valve only requires about 50° of travel to close, the bodyspray head will continue to rotate even after
the valve is closed.
‰ Turn on the main water supply and the water supply to the bodyspray. Check for leaks. Repair as needed.
‰ Turn the bodyspray head counter-clockwise to open the valve and turn on the bodyspray. Check for leaks.
Repair as needed.
‰ Turn the escutcheon until it is snug against the finished wall. A strap wrench can be used, if desired.
1506285-2-A
4 of 11
3. INSTALL THE BODYSPRAY
Wrench
(Included)
TurnSpray
Nipple
Escutcheon
Bodyspray Head
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Bodyspray
™
Publicidad
