Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
7. Attach glass shade (A) into fixture (B).Secure with
bottom cap (FF) and then bottom nut (GG). Restore
power and test light.
Hardware Used
Bottom Cap
FF
Bottom Nut
GGD
CARE AND MAINTENANCE
To clean, unplug the lamp and wipe it with a damp, non-abrasive cloth.
TROUBLESHOOTING
PROBLEM
Bulbs won't light.
Fuse blows out or
circuit breaker trips.
POSSIBLE CAUSE
1. Bulbs are burned out.
2. Power is off.
3. Bad wire connection.
4. Bad switch.
1. Crossed wires or power
wire is grounding out.
7
B B
x 1
A
x 1
CORRECTIVE ACTION
1. Replace the bulb.
2. Check if power supply is on.
3. Check wiring.
4. Test or replace the switch.
1a. Check the wiring connection.
1b. Consult a qualified electrician.
5
FF
GG
Lowes.com/allenandroth
EE
Publicidad
