Publicidad
Idiomas disponibles
Idiomas disponibles
Control
This ¼in microphone input is used to connect the wired microphone supplied with
1. ¼in mic input jack
the unit, which will work in all modes.
Connect a digital media player, a mobile phone or other audio source to this
2. 3.5mm aux input
3.5mm stereo line-in connector. Also use this input to connect the antenna
cable with a 3.5mm connector.
Enables audio playback from music files stored in a micro SD
3. Micro SD™ card slot
(TF card)
Enables audio playback from music files stored in a USB memory stick.
4. USB port
Use this switch to turn the speaker on or off.
5. Power On/Off switch
Plug the supplied micro USB power cable in this jack to charge the battery.
6. 5VDC micro USB
Note: AC adapter is not included.
power jack
In USB and SD
7. Numbered keys (0 to 9)
TM
you want to play. In the FM mode choose the channel or enter in the radio station
frequency you want to listen to.
Use this knob to increase or decrease the volume level of the microphone.
8. - Mic. vol. + knob
Use this knob to increase or decrease the echo effects of the microphone.
9. - Echo + knob
Use this knob to increase or decrease the volume level of the speaker.
10. - Volume + knob
This screen displays the selected input mode: Bluetooth
11. LED display
FM, the track being played, and the selected channel.
Press this button to cycle through the different audio sources: FM, Aux in,
12. Mode selector button
, USB and SD
Bluetooth
®
Note: the USB and SD
unit to follow this sequence.
If these sources are not connected, it will not be recognized as an input source on
the display.
Press this button once to switch into the four different LED lightning effects. Press
13. Light button
and hold this button to turn this function off.
Use this button to adjust the loudness of the treble and bass frequencies in the
14. EQ button
speaker. The 'H' (treble) and 'b' (bass) indications will be displayed, adjust the
frequency from -5 to 5 with the
inactivity the unit will automatically go back to the current mode displayed.
This button enables the recording function when using the wired microphone. A
15. Rec/Del - TWS button
USB or micro SD
captured by the microphone, auxiliary and tuner inputs can be recorded and
saved in the memory selected.
Also use this button to connect the speaker into the TWS mode.
Description
card.
TM
modes, press any key from 0 to 9 to choose directly the tracks
, USB, Aux, micro SD
®
modes.
TM
sources need to be connected to be recognized by the
TM
and
buttons. After about 2 seconds of
memory cards are required to use this feature. The audio
TM
16. Repeat / CH button
17.
/ FM- button
18.
/ Auto scan button
19.
/ FM-+ button
IV. Initial set up
• Use the supplied 5VDC micro USB cable to charge your portable speaker directly from your own 5V/2A AC adapter.
• Make sure that the speaker is fully charged before using it for the first time.
• The portable speaker battery has to be initially charged for at least 5 hours. Thereafter, the battery will take
4-5 hours to recharge.
and
TM
• While charging, the battery LED indicator will light up in red. It will go off when the battery is fully charged.
• Turn off the speaker when not in use to conserve battery life.
• Turn the power switch to the on position.
Note: when the battery charge is below the protected voltage (6.0V) the unit will shut down automatically.
Using the wired microphone
1. Plug the wired microphone in the ¼in mic input jack.
2. Turn on the microphone. The speaker will detect the device automatically.
3. Adjust the volume and echo effects of the microphone with the corresponding knobs.
Note: the microphone will function in all modes.
VI. Operating modes
Auxiliary mode operation
Recommendation: Use a 3.5mm to 3.5mm cable to enable audio playback from devices fitted with an
auxiliary 3.5mm jack.
a. First, connect one side of the 3.5mm cable to the auxiliary port on the speaker and the other side of the
cable to the source of choice.
b. Press the MODE button to connect the speaker to the AUX mode (the LINE indication will be displayed).
Use it to repeat a track only in USB and SD
modes. Also in FM mode press this
TM
button briefly to switch channels and radio frequencies.
Press this button to select the previous track on your play list. Available in
, SD
, USB and FM modes.
®
TM
Bluetooth
Note: In the FM mode, the first time the speaker is used, press and hold the
button to search available radio stations automatically.
Press this button once to move backwards to preset radio stations.
In USB, SD™ or Bluetooth® mode, briefly press this button to start and pause
media.
In the FM mode, press and hold this button to initiate the scanning of channels from
the lowest up to the highest frequency, and store them automatically as presets in
the memory.
Press this button to select the next track on your play list. Available in Bluetooth
SD
, USB and FM modes.
TM
Note: In the FM mode, the first time the speaker is used, press and hold the
button to search available radio stations automatically.
Press this button once to move forward to the preset radio stations.
,
®
Publicidad
