•
Never stand directly below the device when it is being mounted, removed or
serviced. Have a qualified technician check the device once a year and once
before you bring it into service.
•
Install the device in a location with few passers-by that is inaccessible to
unauthorised persons.
•
Overhead mounting requires extensive experience: calculating work load limits,
determining the installation material to be used... Have the material and the
device itself checked regularly. Do not attempt to install the device yourself if
you lack these qualifications as improper installation may result in injuries.
•
The installation has to be approved by an expert before the device is taken into
service.
5.
Maintenance
•
All screws should be tightened and free of corrosion.
•
The housing, visible parts, mounting supports and the installation location (e.g.
ceiling, suspension, trussing) should not be deformed, modified or tampered
with e.g. do not drill extra holes in mounting supports, do not change the
location of the connections.
•
Moving mechanic parts must not show any signs of wear and tear.
•
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or
solvents.
•
There are no user-serviceable parts.
•
Contact your dealer for spare parts if necessary.
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use
of this device. For more info concerning this product, please visit our
website www.velleman.eu. The information in this manual is subject to
change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by
Velleman nv. All worldwide rights reserved. No part of this manual may be
copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
26.10.2009
VDLPCS16
3
©Velleman nv