Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Makeup Air Models (not on all units)
*DAM Models
switch located on the front of the electrical control cover
shown in the illustration.
3. Remove the room front.
illustration.
restore power to the unit.
*DBM and *EBM Models
2. Press the mode control button and turn off the unit
displayed to turn off the makeup air module and close
the makeup air duct door.
change that value press the + or - for the fan speed
to normal operation.
NOTE: Digital makeup air units will perform a system
check upon power up, power cycle and once every 7
days if the unit is in occupancy mode. (Mode E turned
During this time the makeup air fans will speed up, slow
down, and then go to the set point.
Service PN
Red Aux
Set Button
RAKCDC
connector
port
49-5000355 Rev. 6

Publicidad

loading